Download

To sync your add-on satellite:
1. Place your satellite.
For more information, see Examples of Placement for Multiple Satellites on page 22.
2. Connect the satellite to a power source.
3. If the Power LED on the back of the satellite does not light, press the Power On/Off button.
4. Wait about two minutes for the satellite ring LED to light solid white.
5. Press the Sync button on the back of the satellite and within two minutes, press the Sync button on the
back of your Orbi router.
The satellite ring LED pulses white, then lights one of the following colors for about three minutes, and
then turns off:
• Blue.The Orbi router and satellite successfully synced, and the connection between the router and
satellite is good.
• Amber. The Orbi router and satellite successfully synced, and the connection between the router
and satellite is fair. Consider moving the Orbi satellite closer to the Orbi router.
• Magenta. The Orbi router and satellite failed to sync. Move the satellite closer to the router and try
again.
Log In to Your Router and Add Satellites to Your Network
You can use the router web interface to add a satellite to your Orbi network.
To add a satellite to your Orbi network using the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select Add Orbi Satellite.
The Place Your Satellite page displays.
5. Follow the instructions about where to place your satellite in your house.
6. Connect the satellite to a power source.
7. If the Power LED on the back of the satellite does not light, press the Power On/Off button.
8. Click the NEXT button.
9. Wait about two minutes for the satellite’s ring LED to light solid white.
10. Press the Sync button on the satellite.
Overview
25
Orbi WiFi System