Orbi WiFi System User Manual February 2018 202-11675-09 350 E.
Orbi WiFi System Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources. Conformity For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621. Compliance For regulatory compliance information, visit http://www.netgear.com/about/regulatory.
Contents Chapter 1 Overview Orbi Router and Satellite Models...........................................................................9 Orbi Router and Satellite Hardware Overviews...................................................10 Orbi Router Model RBR50 Hardware Overview..............................................11 Orbi Satellite Model RBS50 Hardware Overview............................................12 Orbi Router Model RBR40 Hardware Overview..............................................
Orbi WiFi System Specify IPv6 Internet Connections.......................................................................39 Requirements for Entering IPv6 Addresses.........................................................40 Use Auto Detect for an IPv6 Internet Connection................................................40 Use Auto Config for an IPV6 Internet Connection................................................41 Set Up an IPv6 6rd Tunnel Internet Connection..............................................
Orbi WiFi System Set Up a Guest WiFi Network..............................................................................77 View or Change Advanced WiFi Settings.............................................................78 Use the Router as a WiFi Access Point...............................................................79 Generate a New Backhaul Password...................................................................80 Set Up a Bridge for a Port Group or VLAN Tag Group..............................
Orbi WiFi System Edit a Port Forwarding Service......................................................................106 Delete a Port Forwarding Entry.....................................................................107 Application Example: Make a Local Web Server Public................................108 How the Router Implements the Port Forwarding Rule.................................108 Port Triggering..................................................................................................
Orbi WiFi System Technical Specifications for Orbi Routers..........................................................143 Technical Specifications for Orbi Router Model RBR50................................144 Technical Specifications for Orbi Router Model RBR40................................145 Technical Specifications for Orbi Router Model RBR20................................146 Technical Specifications for Orbi Satellites........................................................
Overview 1 The Orbi™ WiFi System creates dedicated high-speed WiFi connections to your Internet service.The Orbi router connects to your modem or gateway. The Orbi satellite extends the WiFi signal throughout your home.
Orbi WiFi System Orbi Router and Satellite Models Different types of Orbi routers and satellites are available. To determine which Orbi model you own, look on the router or satellite label for the model number. For more information about what the label might look like, see Labels on page 31. The following is a list of the Orbi routers and satellites that are available.
Orbi WiFi System Figure 1. Orbi models 1. Orbi router model RBR50 2. Orbi satellite model RBS50 3. Orbi router model RBR40 4. Orbi satellite model RBS40 5. Orbi router model RBR20 6. Orbi satellite model RBS20 7. Orbi wall plug satellite model RBW30 Orbi Router and Satellite Hardware Overviews The following sections display the hardware features available for different Orbi routers and satellites.
Orbi WiFi System Orbi Router Model RBR50 Hardware Overview Figure 2. Orbi router model RBR50, front and back views 1. Ring LED (not shown in image) 2. Sync button (also used for WPS connection) 3. Internet port 4. Ethernet ports 5. USB port 6. Power On/Off button 7. Power LED 8. DC Power connector 9.
Orbi WiFi System Orbi Satellite Model RBS50 Hardware Overview Figure 3. Orbi satellite model RBS50, front and back views 1. Ring LED (not shown in image) 2. Sync button (also used for WPS connection) 3. Ethernet ports 4. USB port 5. Power On/Off button 6. Power LED 7. DC Power connector 8.
Orbi WiFi System Orbi Router Model RBR40 Hardware Overview 1. Ring LED (not shown in image) 2. Sync button (also used for WPS connection) 3. Internet port 4. Ethernet ports 5. Power On/Off button 6. Power LED 7. DC Power connector 8.
Orbi WiFi System Orbi Satellite Model RBS40 Hardware Overview Figure 5. Orbi satellite model RBS40, front and back views 1. Ring LED (not shown in image) 2. Sync button (also used for WPS connection) 3. Ethernet ports 4. Power On/Off button 5. Power LED 6. DC Power connector 7.
Orbi WiFi System Orbi Router Model RBR20 Hardware Overview 1. Ring LED (not shown in image) 2. Sync button (also used for WPS connection) 3. Internet port 4. Ethernet port 5. Power On/Off button 6. Power LED 7. DC Power connector 8.
Orbi WiFi System Orbi Satellite Model RBS20 Hardware Overview Figure 7. Orbi satellite model RBS40, front and back views 1. Ring LED (not shown in image) 2. Sync button (also used for WPS connection) 3. Ethernet ports 4. Power On/Off button 5. Power LED 6. DC Power connector 7.
Orbi WiFi System Orbi Wall Plug Satellite Model RBW30 Hardware Overview Figure 8. Orbi wall plug satellite model RBW30, front and back views 1. Ring LED (not shown in image) 2. Sync button (also used for WPS connection) 3. Reset button LED Behavior When you sync a satellite to the router, the LED behavior for a satellite that comes in a WiFi system is different from the LED behavior for add-on satellites.
Orbi WiFi System Table 1. Orbi WiFi System router and satellite LED descriptions LED LED Behavior Power LED The Power LED is located above the Power On/Off button on the rear panel. Note: The wall plug satellite does not include a Power LED. • Solid green. Power is on. • Solid amber. The router or satellite is booting. • Blinking amber. The router or satellite is resetting to factory default settings. • Blinking red. The firmware is corrupted. • Off. Power is not supplied.
Orbi WiFi System Table 2. Orbi add-on satellite LED description LED LED Behavior Power LED The Power LED is located above the Power On/Off button on the rear panel. Note: The wall plug satellite does not include a Power LED. • Solid green. Power is on. • Solid amber. The satellite is rebooting. • Blinking amber. The satellite is resetting to factory default settings. • Blinking red. The firmware is corrupted. • Off. Power is not supplied.
Orbi WiFi System 3. Connect your modem to the Internet port of your router with the yellow Ethernet cable that came with your router. The router shown in this is the Orbi router (model RBR50). The same setup applies to all Orbi routers. 4. Connect the power adapter to your router and plug the power adapter into an outlet. 5. If the Power LED does not light, press the Power On/Off button on the rear panel of the router.
Orbi WiFi System Figure 9.
Orbi WiFi System Figure 10. Multilevel house with one Orbi satellite Examples of Placement for Multiple Satellites If you own more than one Orbi satellite, we recommend that you place your router in the middle of your home with the satellites placed on opposite sides of your home. The router shown in the following images is the Orbi router model RBR50 and the satellites shown in the images are the Orbi satellites model RBS50.
Orbi WiFi System Figure 11. Single-story house with two Orbi satellites If you have a multi-level house, place the satellites on different floors. Figure 12.
Orbi WiFi System Sync Your Orbi Satellite The sync process for your satellite depends on whether your satellite came with your Orbi WiFi System, or if your satellite is an add-on satellite. Sync a Satellite From an Orbi WiFi System The Orbi WiFi System includes an Orbi router and either one or two satellites. The satellite in the WiFi system is preset to automatically find and sync to the WiFi signal from the Orbi router in the same WiFi system. To sync your satellite: 1. Place your satellite.
Orbi WiFi System To sync your add-on satellite: 1. Place your satellite. For more information, see Examples of Placement for Multiple Satellites on page 22. 2. Connect the satellite to a power source. 3. If the Power LED on the back of the satellite does not light, press the Power On/Off button. 4. Wait about two minutes for the satellite ring LED to light solid white. 5. Press the Sync button on the back of the satellite and within two minutes, press the Sync button on the back of your Orbi router.
Orbi WiFi System The satellite’s ring LED pulses white. 11. Click the SYNC button in the router web interface. The router attempts to sync with the satellite. The satellite’s ring LED lights one of the following colors for about three minutes and then turns off: • Blue. The Orbi router and satellite successfully synced, and the connection between the router and satellite is good. • Amber. The Orbi router and satellite successfully synced, and the connection between the router and satellite is fair.
Orbi WiFi System Figure 14. Satellite 1 connected to router and satellite 2 connected to satellite 1 The following image shows how to connect your Orbi satellites and your Orbi router to an Ethernet switch. Note The Ethernet ports on the Orbi router and satellite are rated at 1 Gbps. Make sure the switch ports are 1 Gbps or faster. Figure 15.
Orbi WiFi System Download the NETGEAR Orbi App You can use the NETGEAR Orbi app to set up your Orbi network. To find the app, scan a QR code or search for NETGEAR Orbi in the Apple App Store or Google Play Store. Launch the NETGEAR Orbi app on your mobile device and follow the prompts.
Connect to the Network and Access the Router This chapter contains the following sections: • • • • • • Connect to the Network Labels Types of Logins Use a Web Browser to Access the Router Change the Language Access the Orbi Router With NETGEAR genie App 29 2
Orbi WiFi System Connect to the Network You can connect to the Orbi network through a wired or WiFi connection. If you set up your computer to use a static IP address, change the settings so that it uses Dynamic Host Configuration Protocol (DHCP). Wired Connection You can connect your computer to the router using an Ethernet cable and join the router’s local area network (LAN). To connect your computer to the router with an Ethernet cable: 1.
Orbi WiFi System 3. Press the Sync button on the router. 4. Within two minutes, on your WiFi-enabled computer or mobile device, press its WPS button or follow its instructions for WPS connections. Your computer or mobile device connects to the WiFi network. Labels The router label shows the login information, the WiFi network name and password, the router’s MAC address, and the router’s serial number. The following is an example of what the router label might look like: Figure 16.
Orbi WiFi System • Internet service login. The login that your Internet service provider (ISP) gave you logs you in to your Internet service. Your service provider gave you this login information in a letter or some other way. If you cannot find this login information, contact your service provider. • WiFi network key or password. Your router and satellite are preset with the same WiFi network name (SSID) and password for WiFi access. This information is on the router label and the satellite label.
Orbi WiFi System • The first time that you set up the Internet connection for your router, the browser goes to orbilogin.com, and the Orbi login page displays. • If you already set up the Internet connection, enter orbilogin.com in the address field for your browser to start the installation process. 4. Follow the onscreen instructions. The router connects to the Internet. 5.
Orbi WiFi System Change the Language By default, the language is set as Auto. To change the language: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Specify Your Internet Settings 3 Usually, the quickest way to set up the router to use your Internet connection is to allow Orbi to detect the Internet connection when you first access the router with a web browser.You can also customize or specify your Internet settings.
Orbi WiFi System Use the Internet Setup Wizard You can use the Setup Wizard to detect your Internet settings and automatically set up your router. To use the Setup Wizard: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive.
Orbi WiFi System 5. Leave the Does your Internet connection require a login No radio button selected. 6. If your Internet connection requires an account name or host name, type it in the Account Name (If Required) field. 7. If your Internet connection requires a domain name, type it in the Domain Name (If Required) field. For the other sections in this page, the default settings usually work, but you can change them. 8. Select an Internet IP Address radio button: • Get Dynamically from ISP.
Orbi WiFi System The BASIC Home page displays. 4. Select Internet. The Internet Setup page displays. 5. Select the Does your Internet connection require a login Yes radio button. The page adjusts. 6. From the Internet Service Provider menu, select the encapsulation method: The selections are PPPoE, PPTP, or L2TP. 7. In the Login field, enter the login name your ISP gave you. This login name is often an email address. 8.
Orbi WiFi System Your settings are saved. 16. Click the Test button to test your Internet connection. If the NETGEAR website does not display within one minute, see Cannot Access the Internet on page 124. Specify IPv6 Internet Connections You can set up an IPv6 Internet connection if genie does not detect it automatically. To set up an IPv6 Internet connection: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Orbi WiFi System Requirements for Entering IPv6 Addresses IPv6 addresses are denoted by eight groups of hexadecimal quartets that are separated by colons. You can reduce any four-digit group of zeros within an IPv6 address to a single zero or omit it.
Orbi WiFi System 7. (Optional) Select the Use This Interface ID check box and specify the interface ID to be used for the IPv6 address of the router’s LAN interface. If you do not specify an ID here, the router generates one automatically from its MAC address. 8. Click the Apply button. Your settings are saved. Use Auto Config for an IPV6 Internet Connection To set up an IPv6 Internet connection through auto configuration: 1.
Orbi WiFi System • Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function. • Auto Config. This is the default setting. 9. (Optional) Select the Use This Interface ID check box and specify the interface ID that you want to be used for the IPv6 address of the router’s LAN interface. If you do not specify an ID here, the router generates one automatically from its MAC address. 10. Click the Apply button.
Orbi WiFi System • 6rd (IPv6 Rapid Development) Configuration. The router detects the service provider’s IPv4 network and attempts to establish an IPv6 6rd Tunnel connection. If the IPv4 network returns 6rd parameters to the router, the page adjusts to display the correct settings in this section. • Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router’s LAN interface.
Orbi WiFi System 5. From the Internet Connection Type menu, select 6to4 Tunnel. The page adjusts. The router automatically detects the information in the Router’s IPv6 Address on LAN field. This field shows the IPv6 address that is acquired for the router’s LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6.
Orbi WiFi System 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > IPv6. The IPv6 page displays. 5. From the Internet Connection Type menu, select Pass Through. The page adjusts, but no additional fields display. 6. Click the Apply button. Your settings are saved.
Orbi WiFi System 7. Select an IP Address Assignment radio button: • Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function. • Auto Config. This is the default setting. This setting specifies how the router assigns IPv6 addresses to the devices on your home network. 8. In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length of the router’s LAN interface.
Orbi WiFi System • Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP automatically assigns this address. • Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also. 7. (Optional) In the User Class (If Required) field, enter a host name.
Orbi WiFi System The page adjusts. The router automatically detects the information in the following fields: • Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired for the router’s WAN (or Internet) interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. • Router’s IPv6 Address on LAN.
Orbi WiFi System along the way. If a device in the data path uses a lower MTU setting than the other devices, the data packets must be split or “fragmented” to accommodate the device with the smallest MTU. The best MTU setting for NETGEAR equipment is often the default value. In some situations, changing the value fixes one problem but causes another.
Orbi WiFi System Table 3. Common MTU sizes MTU Application 1500 The largest Ethernet packet size. This setting is typical for connections that do not use PPPoE or VPN, and is the default value for NETGEAR routers, adapters, and switches. 1492 Used in PPPoE environments. 1472 Maximum size to use for pinging. (Larger packets are fragmented.) 1468 Used in some DHCP environments. 1460 Usable by AOL if you do not send or receive large email attachments, for example. 1436 Used in PPTP environments or with VPN.
Control Access to the Internet 4 The router comes with a built-in firewall that helps protect your home network from unwanted intrusions from the Internet.
Orbi WiFi System Set Up Parental Controls To set up Parental Controls, you must download the NETGEAR genie app on your mobile device. For more information about the NETGEAR genie app, visit NETGEAR.com/genie. After you set up and enable Parental Controls, you can change the web filtering level for each device on the network through the network map page on the genie app. To set up Parental Controls: 1. Connect your mobile device to your router’s WiFi network. 2.
Orbi WiFi System 6. Select an access rule: • Allow all new devices to connect. With this setting, if you buy a new device, it can access your network. You don’t need to enter its MAC address on this page. We recommend that you leave this radio button selected. • Block all new devices from connecting. With this setting, if you buy a new device, before it can access your network, you must enter its MAC address for an Ethernet connection and its MAC address for a WiFi connection in the allowed list.
Orbi WiFi System 6. In the Type keyword or domain name here field, enter a keyword or domain that you want to block. For example: • Specify XXX to block http://www.badstuff.com/xxx.html. • Specify .com if you want to allow only sites with domain suffixes such as .edu or .gov. • Enter a period (.) to block all Internet browsing access. 7. Click the Add Keyword button. The keyword is added to the keyword list. The keyword list supports up to 32 entries. 8. Click the Apply button.
Orbi WiFi System Delete Keywords To delete keywords from the list: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Security > Block Sites. The Block Sites page displays. 5.
Orbi WiFi System 6. In the Trusted IP Address field, enter the IP address of the trusted computer. 7. Click the Apply button. Your settings are saved. Block Services From the Internet You can block Internet services on your network based on the type of service. You can block the services all the time or based on a schedule. To block services: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Orbi WiFi System 9. To specify how to filter the services, select one of the following radio buttons: • Only This IP Address. Block services for a single computer. • IP Address Range. Block services for a range of computers with consecutive IP addresses on your network. • All lP Addresses. Block services for all computers on your network. 10. Click the Add button. Your settings are saved. Manage Network Access Control Lists You can use access control to block or allow access to your network.
Orbi WiFi System To schedule blocking: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Security > Schedule. 5. Specify when to block keywords and services: • Days to Block.
Orbi WiFi System 6. In the Primary E-mail Address field, enter the email address to which logs and alerts are sent. This email address is also used for the From address. If this field is blank, log and alert messages are not sent. 7. In the Your Outgoing Mail Server field, enter the name of your ISP outgoing (SMTP) mail server (such as mail.myISP.com). You might be able to find this information in the configuration window of your email program.
Optimize Performance 5 This chapter contains the following sections: • • WiFi Multimedia Quality of Service Improve Network Connections With Universal Plug N Play 60
Orbi WiFi System WiFi Multimedia Quality of Service Wi-Fi Multimedia Quality of Service (WMM QoS) prioritizes WiFi voice and video traffic over the WiFi link. WMM QoS is automatically enabled for the router. WMM QoS prioritizes WiFi data packets from different applications based on four access categories: voice, video, best effort, and background. For an application to receive the benefits of WMM QoS, WMM must be enabled for both it and the client running that application.
Orbi WiFi System The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > UPnP. The UPnP page displays. 5. Select the Turn UPnP On check box. By default, this check box is selected. UPnP for automatic device configuration can be enabled or disabled. If the Turn UPnP On check box is cleared, the router does not allow any device to automatically control router resources, such as port forwarding. 6. Type the advertisement period in minutes.
Specify Network Settings This chapter includes the following sections: • • • • • • • • • • • • • • • • View or Change WAN Settings Dynamic DNS Set Up a Default DMZ Server Change the Router’s Device Name Change the LAN TCP/IP Settings Use the Router as a DHCP Server Disable the DHCP Server Feature in the Router Manage Reserved LAN IP Addresses Custom Static Routes Specify Basic WiFi Settings Set Up a Guest WiFi Network View or Change Advanced WiFi Settings Use the Router as a WiFi Access Point Generate a N
Orbi WiFi System View or Change WAN Settings You can view or configure wide area network (WAN) settings for the Internet port. You can set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the router to respond to a ping to its WAN (Internet) port. To view the WAN settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password.
Orbi WiFi System Dynamic DNS Internet service providers (ISPs) assign numbers called IP addresses to identify each Internet account. Most ISPs use dynamically assigned IP addresses. This means that the IP address can change at any time. You can use the IP address to access your network remotely, but most people don’t know what their IP addresses are or when this number changes.
Orbi WiFi System Specify a DNS Account That You Already Created If you already own a Dynamic DNS account with NETGEAR, no-IP, or Dyn, you can set up the router to use your account. To set up Dynamic DNS if you already created an account: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin.
Orbi WiFi System The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Dynamic DNS. The Dynamic DNS page displays. 5. Change your DDNS account settings as necessary. 6. Click the Apply button. Your settings are saved. Set Up a Default DMZ Server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation (NAT).
Orbi WiFi System Change the Router’s Device Name The router’s device name is its model number. This device name displays in a file manager when you browse your network. To change the router’s device name: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in.
Orbi WiFi System The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays. 5. In the IP Address field, type the IP address. 6. In the IP Subnet Mask, type the subnet mask of the router. The IP address and subnet mask identifies which addresses are local to a specific device and which must be reached through a gateway or router. 7. Change the RIP settings. Router Information Protocol (RIP) allows a router to exchange routing information with other routers. a.
Orbi WiFi System To use the router as a DHCP server and specify the pool of IP addresses that the router assigns: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4.
Orbi WiFi System To disable the DHCP server feature in the router: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays. 5.
Orbi WiFi System 8. Type the MAC address of the computer or server. Tip If the computer is already on your network, you can copy its MAC address from the Attached Devices page and paste it here. 9. Click the Apply button. The reserved address is entered into the table. The reserved address is not assigned until the next time the computer contacts the router’s DHCP server. Reboot the computer, or access its IP configuration and force a DHCP release and renew.
Orbi WiFi System The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Setup > LAN Setup. The LAN Setup page displays. 5. Select the radio button next to the reserved address. 6. Click the Delete button. The address is removed.
Orbi WiFi System 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays. 5. Click the Add button. The page adjusts. 6. In the Route Name field, type a name for this static route (for identification purposes only.) 7.
Orbi WiFi System 5. In the table, select the radio button for the route. 6. Click the Edit button. The Static Routes page adjusts. 7. Edit the route information. 8. Click the Apply button. Your settings are saved. Delete a Static Route To delete a static route: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin.
Orbi WiFi System 3. Enter the Orbi admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Wireless. The Wireless Settings page displays. 5. To change the network name (SSID), type a new name in the Name (SSID) field. The name can be up to 32 characters long and it is case-sensitive.
Orbi WiFi System Change the WiFi Password or Security Level The router and satellite come preset with the same WiFi network name (SSID) and the same WiFi security. You can find the SSID and password on the router label and on the satellite label. If you log in to the router and change the WiFi settings, the router automatically sends the new settings to the satellite. We recommend that you do not disable security. To change the WPA settings: 1.
Orbi WiFi System The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Guest Network. The Guest Network Settings page displays. 5. Select the Enable Guest Network check box. 6. Leave the Enable SSID Broadcast check box selected. Allowing the router to broadcast its WiFi network name (SSID) makes it easier to find your network and connect to it.
Orbi WiFi System 5. In the Region list,- select your region. In some locations, you cannot change this setting. 6. To control the SSID broadcast, select or clear the Enable SSID Broadcast check box. When this check box is selected, the router broadcasts its network name (SSID) so that it displays when you scan for local WiFi networks on your computer or WiFi device. 7. Click the Apply button. Your settings are saved.
Orbi WiFi System Note To avoid interference with other routers or gateways in your network, we recommend that you use different WiFi settings on each router. You can also turn off the WiFi radio on the other router or gateway and use the Orbi only for WiFi client access. 8. Click the Apply button. The IP address of the router changes, and you are disconnected. 9. To reconnect, close and restart your browser and enter orbilogin.com.
Orbi WiFi System Set Up a Bridge for a Port Group If the devices that are connected to the router’s Ethernet LAN port include an IPTV device, your ISP might require you to set up a bridge for a port group for the router’s Internet interface. A bridge with a port group prevents packets that are sent between the IPTV device and the router’s Internet port from being processed through the router’s Network Address Translation (NAT) service. To configure a port group and enable the bridge: 1.
Orbi WiFi System A login window opens. 3. Enter the Orbi admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings. The VLAN / Bridge Settings page displays. 5. Select the Enable VLAN/Bridge Group check box. The page expands. 6. Select the By VLAN tag group radio button. The section expands. 7.
Orbi WiFi System also must support the bridging of the WAN port to the WiFi network name (SSID). The designated LAN port becomes an IPTV port with direct access to the WAN without going through NAT. To configure an IPTV port: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the Orbi admin user name and password. The user name is admin.
Orbi WiFi System 5. Clear the Disable IGMP Proxying check box. 6. Select the Support British Telecom (BT) IGMP Proxying check box. 7. Click the Apply button. Your settings are saved.
Manage Your Network 7 This chapter describes the router settings for administering and maintaining your router and home network.
Orbi WiFi System Update the Router and Satellite Firmware You can use the router web interface to check if new firmware is available and update your router and satellite, or you can manually update the firmware for your router and satellite. Check for Firmware Updates To check for new firmware and update your router and satellite: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Orbi WiFi System To manually update the firmware on your Orbi router and satellite, follow these high level steps: 1. Visit netgear.com/support and download the firmware for both your Orbi router and satellite. 2. Update the firmware on your Orbi satellite. For more information, see Manually Update Satellite Firmware on page 87. 3. Update the firmware on your Orbi router. For more information, see Manually Update Router Firmware on page 87.
Orbi WiFi System To manually update your router's firmware: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Administration > Firmware Update > Manual Update.
Orbi WiFi System 5. Type the old password, and type the new password twice. 6. To be able to recover the password, select the Enable Password Recovery check box. We recommend that you enable password recovery. 7. Click the Apply button. Your settings are saved. Set Up Password Recovery We recommend that you enable password recovery if you change the password for the router user name admin. Then you can recover the password if it is forgotten.
Orbi WiFi System 4. Enter the saved answers to the security questions. 5. Enter the serial number of your router. The serial number is on the router label. 6. Click the Continue button. A window opens and displays your recovered password. 7. Click the Login again button. A login window opens. 8. With your recovered password, log in to the router. View Router Status To view router status and usage information: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network.
Orbi WiFi System Display Internet Port Statistics To display Internet port statistics: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Click the ADVANCED tab. 5.
Orbi WiFi System The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Click the ADVANCED tab. 5. In the Internet Port pane, click the Connection Status button. The Connection Status window opens and displays the following information • IP Address. The IP address that is assigned to the router. • Subnet Mask. The subnet mask that is assigned to the router. • Default Gateway.
Orbi WiFi System A login window opens. 7. Enter the same admin user name and password that you entered for the router. The satellite’s status displays. View and Manage Logs of Router Activity The log is a detailed record of the websites you accessed or attempted to access and other router actions. Up to 256 entries are stored in the log. To view and manage logs: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens.
Orbi WiFi System To view devices connected to your network: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Attached Devices.
Orbi WiFi System 6. To change the device model, enter a new model in the Device Model field. 7. To change the device name, enter a new name in the Device Name field. 8. To change the device type, select a device from the Device Type menu. 9. Click the APPLY button. Your settings are saved. View Satellites Connected to the Network or Edit Satellite Information You can view the satellites that are connected to your Orbi network.
Orbi WiFi System Edit Satellite Information That Displays On the Attached Devices Page You can change the satellite’s model and name that display on the Attached Devices page. To edit the satellite’s model or name that displays on the Attached Devices page: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password. The user name is admin.
Orbi WiFi System 3. Enter the router admin user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Attached Devices. The Attached Devices page displays. 5. Select your satellite. The Edit Device page displays. 6. In the Sync Button section, click the Disabled button. The Sync button is enabled. You can now use the Sync button to sync your satellite to your router.
Orbi WiFi System To set the satellite’s LED lighting brightness: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Attached Devices. The Attached Devices page displays. 5.
Orbi WiFi System 7. If the LED lighting is turned off, click the LED On/Off slider to turn the LED on. The top and bottom Light LEDs turn on. 8. Select the Schedule LED Lighting check box. 9. Click the ADD A NEW PERIOD button. The LED Lighting Schedule page displays. 10. Specify the lighting schedule settings: • Start. Select a start time from the menu. • End. Select an end time from the menu. • Recurrence Pattern. Select if you want the Light LEDs to turn on daily of select specific days. 11.
Orbi WiFi System • - No Limit. No restriction is applied when the traffic limit is reached. - Download only. The restriction is applied to incoming traffic only. - Both Directions. The restriction is applied to both incoming and outgoing traffic. Select the Connection time control radio button and enter the allowed hours in the Monthly limit field. 7.
Orbi WiFi System 5. Click the BACK UP button. 6. Specify a location on your network. A copy of the current settings is saved in the location you specified. Erase the Current Configuration Settings You can erase the current configuration and restore the factory default settings. You might want to do this if you move the router to a different network. To erase the configuration settings: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com.
Orbi WiFi System WARNING: Do not interrupt the reboot process. Set Up Remote Management You can access your router over the Internet to view or change its settings. You must know the router’s WAN IP address to use this feature. For information about Dynamic DNS, see Dynamic DNS on page 65. Note Be sure to change the password for the user name admin to a secure password. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols.
Orbi WiFi System Normal web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote router access. Choose a number from 1024 to 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP. 8. Click the Apply button. Your settings are saved. Use Remote Access To use remote access: 1. Launch a web browser on a computer that is not on your home network. 2.
Customize Internet Traffic Rules for Ports 8 You can use port forwarding and port triggering to set up rules for Internet traffic.You need networking knowledge to set up these features.
Orbi WiFi System Port Forwarding to a Local Server If your home network includes a server, you can allow certain types of incoming traffic to reach the server. For example, you might want to make a local web server, FTP server, or game server visible and available to the Internet. The router can forward incoming traffic with specific protocols to computers on your local network.
Orbi WiFi System Add a Custom Port Forwarding Service To add a custom service: 1. Find out which port number or range of numbers the application uses. You can usually find this information by contacting the publisher of the application or user groups or news groups. 2. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 3. Enter orbilogin.com. A login window opens. 4. Enter the admin user name and password. The user name is admin.
Orbi WiFi System A login window opens. 3. Enter the admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering. The Port Forwarding/Port Triggering page displays. 5. Leave the Port Forwarding radio button selected as the service type. 6.
Orbi WiFi System 6. In the table, select the radio button next to the service name. 7. Click the Delete Service button. Application Example: Make a Local Web Server Public If you host a web server on your local network, you can use port forwarding to allow web requests from anyone on the Internet to reach your web server. To make a local web server public: 1. Assign your web server either a fixed IP address or a dynamic IP address using DHCP address reservation.
Orbi WiFi System • An application must use port forwarding to more than one local computer (but not simultaneously). • An application must open incoming ports that are different from the outgoing port. With port triggering, the router monitors traffic to the Internet from an outbound “trigger” port that you specify. For outbound traffic from that port, the router saves the IP address of the computer that sent the traffic.
Orbi WiFi System 11. Enter the inbound connection port information in the Connection Type, Starting Port, and Ending Port fields. 12. Click the Apply button. The service is now in the Portmap Table. You must enable port triggering before the router used port triggering for the service that you added. See Enable Port Triggering on page 110. Enable Port Triggering To enable port triggering: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.
Orbi WiFi System 1. You open an IRC client program to start a chat session on your computer. 2. Your IRC client composes a request message to an IRC server using a destination port number of 6667, the standard port number for an IRC server process. Your computer then sends this request message to your router. 3. Your router creates an entry in its internal session table describing this communication session between your computer and the IRC server.
Use VPN to Access Your Network 9 You can use OpenVPN software to remotely access your router using virtual private networking (VPN). This chapter explains how to set up and use VPN access.
Orbi WiFi System Set Up a VPN Connection A virtual private network (VPN) lets you use the Internet to securely access your network when you aren’t home. This type of VPN access is called a client-to-gateway tunnel. The computer is the client, and the router is the gateway. To use the VPN feature, you must log in to the router and enable VPN, and you must install and run VPN client software on the computer. VPN uses DDNS or a static IP address to connect with your router.
Orbi WiFi System Install OpenVPN Software You must install this software on each Windows computer, Mac computer, iOS device, or Android device that you plan to use for VPN connections to your router. Install OpenVPN Software on Your Windows Computer You must install this software on each Windows computer that you plan to use for VPN connections to your router. To install VPN client software on your Windows computer: 1.
Orbi WiFi System 11. Click the Next button. 12. When prompted, read the License Agreement and click the I Agree button. 13. Leave the check boxes selected, and click the Next button. 14. To specify the destination folder, click the Browse button and select a destination folder. Figure 18. A Windows Security window opens.
Orbi WiFi System 15. Click the Install button. The window displays the progress of the installation and then displays the final installation page. 16. Click the Finish button. 17. Unzip the configuration files that you downloaded and copy them to the folder where the VPN client is installed on your device. For a client device with Windows 64-bit system, the VPN client is installed at C:\Programfiles\OpenVPN\config\ by default. 18.
Orbi WiFi System The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VPN Service. The VPN Service page displays. 5. Make sure that the Enable VPN Service check box is selected. 6. Specify any VPN service settings on the page. For more information, see Specify VPN Service in the Router on page 113. 7.
Orbi WiFi System 8. On your iOS device, download and install the OpenVPN Connect app from the Apple app store. 9. On your computer, unzip the configuration files that you downloaded and send the files to your iOS device. Note that when you open the .ovpn file, a list of apps displays. Select the OpenVPN Connect app to open the .ovpn file. For more information about using OpenVPN on your iOS device, visit http://www.vpngate.net/en/howto_openvpn.aspx#ios.
Orbi WiFi System For the VPN tunnel to work, the local LAN IP address of the remote router must use a different LAN IP scheme from that of the local LAN where your VPN client computer is connected. If both networks use the same LAN IP scheme, when the VPN tunnel is established, you cannot access your home router or your home network with the OpenVPN software. The default LAN IP address scheme for the router is 192.x.x.x.The most common IP schemes are 192.x.x.x, 172.x.x.x, and 10.x.x.x.
Orbi WiFi System Use VPN to Access Your Internet Service at Home When you’re away from home and you access the Internet, you usually use a local Internet service provider. For example, at a coffee shop you might be given a code that lets you use the coffee shop’s Internet service account to surf the web. Orbi Pro lets you use a VPN connection to access your own Internet service when you’re away from home.
Orbi WiFi System Block VPN Client Internet Access in the Router By default, the router is set up to allow VPN connections only to your home network, not to the Internet service for your home network. If you changed this setting to allow Internet access, you can change it back. To allow VPN clients to access only your home network: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3.
Troubleshooting 10 This chapter provides information to help you diagnose and solve problems you might experience with your Orbi router or satellite. If you do not find the solution here, check the NETGEAR support site at support.netgear.com for product and contact information.
Orbi WiFi System Quick Tips This section describes tips for troubleshooting some common problems. Sequence to Restart Your Network When you restart your network, follow this sequence: 1. Turn off and unplug the modem. 2. Turn off the router. 3. Plug in the modem and turn it on. Wait two minutes. 4. Turn on the router and wait two minutes. WiFi Settings Make sure that the WiFi settings in the WiFi-enabled computer or mobile device and the router match.
Orbi WiFi System • Blue. The Orbi router and satellite successfully synced, and the connection between the router and satellite is good. • Amber. The Orbi router and satellite successfully synced, and the connection between the router and satellite is fair. Consider moving the Orbi satellite closer to the Orbi router. 6. Move the satellite to a location closer to the middle of your home. 7. Connect the satellite to a power source. 8.
Orbi WiFi System The ADVANCED Home page displays. 7. Check that an IP address is shown for the Internet port. If 0.0.0.0 is shown, your router did not obtain an IP address from your Internet service provider (ISP). If your router cannot obtain an IP address from the ISP, you can force your cable or DSL modem to recognize your new router by restarting your network. For more information, see Sequence to Restart Your Network on page 123.
Orbi WiFi System Troubleshoot Internet Browsing If your router can obtain an IP address but your computer is unable to load any web pages from the Internet, it might be for one of the following reasons: • The traffic meter is enabled, and the limit was reached. By configuring the traffic meter not to block Internet access when the traffic limit is reached, you can resume Internet access. If your ISP sets a usage limit, they might charge you for the overage.
Orbi WiFi System The router continues to attempt to connect indefinitely. 7. If you cannot connect after several minutes, the router might be set up with an incorrect service name, user name, or password, or your ISP might be experiencing a provisioning problem. Unless you connect manually, the router does not authenticate using PPPoE until data is transmitted to the network.
Orbi WiFi System Pinging with 32 bytes of data If the path is working, you see this message: Reply from < IP address >: bytes=32 time=NN ms TTL=xxx If the path is not working, you see this message: Request timed out If the path is not functioning correctly, you might be experiencing one of the following problems: • Wrong physical connections For a wired connection, make sure that the numbered LAN port LED is lit for the port to which you are connected.
Orbi WiFi System modem. If your ISP does this, configure your router to “clone” or “spoof” the MAC address from the authorized computer.
Supplemental Information This appendix covers the following topics: • Factory Settings for Orbi Routers on page 131 • Factory Settings for Orbi Satellites on page 136 • Technical Specifications for Orbi Routers on page 143 • Technical Specifications for Orbi Satellites on page 148 130 11
Orbi WiFi System Factory Settings for Orbi Routers You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least seven seconds. The router resets, and returns to the factory settings. Factory Settings for Orbi Router Model RBR50 The following table shows the factory default settings for the router. Table 4.
Orbi WiFi System Table 4. Factory default settings for the router (Continued) Feature WiFi Default Setting WiFi communication Enabled SSID name See router label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto Country/region United States in the US; otherwise, varies by region RF channel 2.
Orbi WiFi System Table 5. Factory default settings for the router (Continued) Feature Local network (LAN) Firewall Default Setting LAN IP 192.168.1.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.1.2 to 192.168.1.254 DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.168.1.
Orbi WiFi System Table 5. Factory default settings for the router (Continued) Feature WiFi Default Setting WiFi communication Enabled SSID name See router label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto Country/region United States in the US; otherwise, varies by region RF channel 2.
Orbi WiFi System Table 6. Factory default settings for the router (Continued) Feature Local network (LAN) Firewall Default Setting LAN IP 192.168.1.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.1.2 to 192.168.1.254 DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.168.1.
Orbi WiFi System Table 6. Factory default settings for the router (Continued) Feature WiFi Default Setting WiFi communication Enabled SSID name See router label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto Country/region United States in the US; otherwise, varies by region RF channel 2.
Orbi WiFi System Table 7. Factory default settings for the satellite Feature Router login Default Setting User login URL orbilogin.com User name (case-sensitive) admin Login password (case-sensitive) password Internet WAN MAC address connection WAN MTU size Local network (LAN) Use default hardware address 1500 Port speed AutoSensing LAN IP 192.168.1.250 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.1.2 to 192.168.1.254 DHCP starting IP address 192.168.1.
Orbi WiFi System Table 7. Factory default settings for the satellite (Continued) Feature WiFi Default Setting WiFi communication Enabled SSID name See satellite label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto Country/region United States in the US; otherwise, varies by region RF channel 2.
Orbi WiFi System Table 8. Factory default settings for the satellite (Continued) Feature Local network (LAN) Default Setting LAN IP 192.168.1.250 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.1.2 to 192.168.1.254 DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.168.1.
Orbi WiFi System Table 8. Factory default settings for the satellite (Continued) Feature WiFi Default Setting WiFi communication Enabled SSID name See satellite label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto Country/region United States in the US; otherwise, varies by region RF channel 2.
Orbi WiFi System Table 9. Factory default settings for the satellite (Continued) Feature Local network (LAN) Default Setting LAN IP 192.168.1.250 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.1.2 to 192.168.1.254 DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.168.1.
Orbi WiFi System Table 9. Factory default settings for the satellite (Continued) Feature WiFi Default Setting WiFi communication Enabled SSID name See satellite label Security WPA2-PSK (AES) Broadcast SSID Enabled Transmission speed Auto Country/region United States in the US; otherwise, varies by region RF channel 2.
Orbi WiFi System Table 10. Factory default settings for the satellite (Continued) Feature Default Setting Local LAN IP network Subnet mask (LAN) DHCP server 192.168.1.250 255.255.255.0 Disabled DHCP range 192.168.1.2 to 192.168.1.254 DHCP starting IP address 192.168.1.2 DHCP ending IP address 192.168.1.
Orbi WiFi System Technical Specifications for Orbi Router Model RBR50 The following table shows the technical specifications for the router. Table 11. RBR50 specifications Feature Description Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and SMB Power adapter • North America: 120V, 60 Hz, input • UK, Australia: 240V, 50 Hz, input • Europe: 230V, 50 Hz, input • All regions (output): 12V, 3.5A DC output Dimensions 6.7 x 3.1 x 8.89 in. (170.
Orbi WiFi System Table 11. RBR50 specifications (Continued) Feature Description Operating frequency range 2.4 GHz: • 2.412–2.462 GHz (US) • 2.412–2.472 GHz (Japan) • 2.412–2.472 GHz (Europe ETSI) 5 GHz: 802.11 security • 5.18 GHz–5.24 GHz and 5.745 GHz–5.825 GHz (US) • 5.18 GHz–5.24 GHz and 5.5 GHz–5.7 GHz (Europe, Japan) • 5.26 GHz–5.32 GHz (Europe, Japan, to be supported in later firmware.) WPA-PSK [TKIP], WPA2-PSK [AES] 8 Maximum wireless signal rate derived from IEEE Standard 802.
Orbi WiFi System Table 12. RBR40 specifications (Continued) Feature Description Electromagnetic emissions FCC Part 15 Class B VCCI Class B EN 55 022 (CISPR 22), Class B C-Tick N10947 LAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45 WAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45 WiFi Maximum wireless signal rate complies with the IEEE 802.11 9 standard. Radio data rates 2.4 GHz: Max 400 Mbps 5 GHz Front haul: Max 866 Mbps 5 GHz Back haul: Max 866 Mbps Data encoding standards IEEE 802.11b/g/n 2.
Orbi WiFi System Table 13. Technical specifications for the router. Feature Description Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and SMB Power adapter • North America: 120V, 60 Hz, input • UK, Australia: 240V, 50 Hz, input • Europe: 230V, 50 Hz, input • All regions (output): 12V, 1.5A DC output Dimensions 6.4 x 3.1 x 8.0 in. (163 x 78 x 203 mm) Weight 1.
Orbi WiFi System Table 13. Technical specifications for the router. (Continued) Feature Description Operating frequency range 2.4 GHz: • 2.412–2.462 GHz (US) • 2.412–2.472 GHz (Japan) • 2.412–2.472 GHz (Europe ETSI) 5 GHz: 802.11 security • 5.18 GHz–5.24 GHz and 5.745 GHz–5.825 GHz (US) • 5.18 GHz–5.24 GHz and 5.5 GHz–5.7 GHz (Europe, Japan) • 5.26 GHz–5.32 GHz (Europe, Japan, to be supported in later firmware.
Orbi WiFi System Table 14. RBS50 specifications (Continued) Feature Description Operating temperature 0° to 40°C (32º to 104ºF) Operating humidity 90% maximum relative humidity, noncondensing Electromagnetic emissions FCC Part 15 Class B VCCI Class B EN 55 022 (CISPR 22), Class B C-Tick N10947 LAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45 WAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45 WiFi Maximum wireless signal rate complies with the IEEE 802.11 11 standard. Radio data rates 2.
Orbi WiFi System Technical Specifications for Orbi Router Model RBS40 The following table shows the technical specifications for the satellite. Table 15. RBS40 specifications Feature Description Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and SMB Power adapter • North America: 120V, 60 Hz, input • UK, Australia: 240V, 50 Hz, input • Europe: 230V, 50 Hz, input • All regions (output): 12V, 2.5A DC output Dimensions 6.4 x 3.1 x 8.0 in.
Orbi WiFi System Table 15. RBS40 specifications (Continued) Feature Description Operating frequency range 2.4 GHz: • 2.412–2.462 GHz (US) • 2.412–2.472 GHz (Europe ETSI) 5 GHz: 802.11 security • 5.18 GHz–5.24 GHz and 5.745 GHz–5.825 GHz (US) • 5.18 GHz–5.24 GHz and 5.5 GHz–5.7 GHz (Europe) • 5.26 GHz–5.32 GHz (Europe) WPA-PSK [TKIP], WPA2-PSK [AES] 12 Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary.
Orbi WiFi System Table 16. Technical specifications for the satellite (Continued) Feature Description WAN 10BASE-T or 100BASE-TX or 1000BASE-T, RJ-45 WiFi Maximum wireless signal rate complies with the IEEE 802.11 13 standard. Radio data rates 2.4 GHz: Max 400 Mbps 5 GHz Front haul: Max 866 Mbps 5 GHz Back haul: Max 866 Mbps Data encoding standards IEEE 802.11b/g/n 2.4 GHz–256 QAM support IEEE 802.
Orbi WiFi System Table 17. RBW30 specifications (Continued) Feature Description Dimensions 6.4 x 3.1 x 8 in. (83.8 x 76.2 x 161 mm) Weight 0.67 lb (306 g) Operating temperature 0° to 40°C (32º to 104ºF) Operating humidity 90% maximum relative humidity, noncondensing Electromagnetic emissions FCC Part 15 Class B EN55032 (CISPR 32), Class B C-Tick N10947 WiFi Maximum wireless signal rate complies with the IEEE 802.11 14 standard. Radio data rates 2.
