User manual

NMS300 Network Management System Application
Discover and Manage Resources User Manual75
8. Click the Add button.
9. To filter the devices that display in the pop-up window, click the Show Filter button.
You can filter the devices by criteria such as device type, device name and IP address,
location, device model, and status.
To hide the device filter, click the Hide Filter button.
10. In the Select Devices pop-up window,
select devices for the group.
11. Click the Add Selection button.
To add all devices, click the Add All button.
12. If you are modifying an existing static device group, to remove devices:
a. Select the devices.
b. Click the Remove button.
The devices are removed from the Associated Devices table.
13. Click the Submit button.
The pop-up window closes. The devices are added to the static device group, and the
group is displayed in the Device Groups table.
Add or modify a dynamic device group
A dynamic group is a dynamic list of devices that are selected automatically based on your
filter selection criteria. The list changes automatically as devices that meet the filter criteria
are added to and removed from the network.
To add a dynamic device group or modify an existing dynamic device group:
1. Open a browser and connect to the application through the static IP address of the
NMS300 server.
For more information, see
Log in to the application on page 21.