Owner's Manual

Configuration Management

NMS300 Network Management System

2. Select the configuration file for which you want to schedule a restore procedure and click the

Restore Configuration button.

3. Select the target network devices or groups.

For more information, see Restore the Configuration of a Single Device on page 67 or

Configure Several Identical Devices on page 70.

CAUTION:

Failure to select the correct devices for the selected configuration file can

damage the devices.

4. Click the Schedule button.

A screen similar to the following displays:

5. Specify the time you want the procedure to start and click the Submit button.

Your restore procedure is executed once at the specified time.

6. (Optional) Select JOBS > JOB MANAGEMENT.

You can enable, disable, or delete the future execution of this backup procedure. For

more information, see Job Control on page 143.

Upgrade Your Device Firmware

NETGEAR posts the latest firmware for each NETGEAR device on support.netgear.com.

Note: As a best practice, NETGEAR recommends that you check

support.netgear.com regularly for the latest firmware.