Owner's Manual

Configuration Management
67
NMS300 Network Management System
A screen similar to the following displays:
This screen displays the execution history of a job and whether the job succeeded or
failed.
4. Click the Close button.
The screen closes.
Restore Your Device Configurations
You can restore the configurations of the NETGEAR devices on your network.
• Single device. Y
ou can restore the configuration of a single device on your network. For
more information, see Restore the Configuration of a Single Device on page 67.
• Several identical devices. Y
ou can use the configuration of one of the devices on your
network to create a template configuration for several identical devices on your network.
For more information, see Configure Several Identical Devices on page 70.
CAUTION:
When you restore the configuration of a device, you have to provide the
correct configuration file. You need to make sure that you select both the
correct device type and correct device model for the configuration file that
you upload to the NMS300 system. When you provide the wrong
configuration file, the NMS300 system pushes out the incorrect
configuration file while it executes the configuration restore and you can
damage the device.
Restore the Configuration of a Single Device
You can restore the configuration of a single device.