Owner's Manual

Performance Monitoring
48
NMS300 Network Management System
To move the parameters between the Available and Selected lists, use the >, <, >>, and
<< buttons.
a. In the Available list, click the parameter you want to monitor.
b. Click the > button.
The parameter moves to the Selected list.
13. Click the Save button.
Your changes are saved.
14. Click the Close button.
The Monitor Configuration screen closes.
View and Modify the Polling Interval
You can view and modify the polling interval for each metric to control how frequently the
device and network information is updated.
 To view the polling interval for each metric:
1. Select MONITOR > MONIT
OR CONFIGURATION.
A screen similar to the following displays:
The current polling interval for each metric is listed on the screen in the Polling Interval
(minutes) column.
2. Modify the polling interval for each metric.
For more information, see Configure the General Monitor Information on page 46.
View Device Details
You can view the following types of detailed information for a device:
• Switch details
• Interface list