Installation Guide

NMS300 Network Management System Application
Manage Configurations and Firmware Quick Start Guide83
5. Click the Load Image button.
6. Specify the following information:
• Select Your File. Click the Select button.
To select the firmware from your computer, follow the directions of your browser.
• Enable MD5 Check.
To enable file validation with the Message Digest 5 algorithm,
select this check box and click the Select button.
To select the MD5 file from your computer, follow the directions of your browser.
• File Name. Enter the name of the firmware file.
• Vendor. Select the vendor of the device.
• Device Type. Select the device type.
• Device Model. Select the device model.
• Version. Enter the version of the firmware file.
• Description. Enter a description for the firmware file.
7. Click the Submit button.
The firmware file is transferred from your computer to the NMS300 server.
The imported firmware file is saved for the data retention period. For more information,
see the NMS300 Network Management System
Application User Manual.