Installation Guide

NMS300 Network Management System Application
Manage Configurations and Firmware Quick Start Guide77
A pop-up window similar to the following opens.
The Status field displays the progress of the backup job. After the job completes
successfully, the Status field displays Succeeded.
11. Click the Close button.
The pop-up window closes.
Restore the configuration of a single device
You can restore the configurations of the devices that the application manages on your
network, as follows:
• Single device. You can restore the configuration of a single device on your network. This
procedure is described in this section.
• Several identical devices.
You can use the configuration of one of the devices on your
network to create a configuration template for several identical devices on your network.
For more information, see the NMS300 Network Management System Application User
Manual.
The Restore table (which you access by selecting CONFIG > REST
ORE) displays the
backup configuration files that the application adds after it backed up a configuration.
The application saves backup configuration files for the data retention period. For more
information, see the NMS300 Network Management System Application User Manual.
If the configuration file that you need does not display in the Restore table, you can import the
file into the application. For more information, see the NMS300 Network Management
System Application User Manual.