Installation Guide

Table Of Contents

NMS300 Network Management System Application

Monitor Your Network Quick Start Guide64

Manage the configuration monitors

The application provides monitors for the following device metrics:

• Status

• ICMP ping

• CPU

• Memory

• Temperature

• Disk (for storage devices)

• IP traffic

• ICMP traffic

• TCP traffic

• UDP traffic

• SNMP traffic

• Interface traffic

In addition, the application provides monitors for the following server, wireless device, and

storage system metrics:

• NMS system server

• Radio statistics

• WLAN utilization

• VAP statistics (wireless performance statistics of the WLAN network based on SSID)

• Wired Ethernet statistics (wired performance statistics of standalone APs)

• Storage temperature

• Storage disk temperature

• Storage disk capacity

By default, all monitors are enabled. You can disable or reenable individual monitors and

specify the information and devices that are monitored.

For each individual monitor, you can modify the information and devices that are monitored.

To configure an individual monitor:

1. Open a browser and connect to the application through the static IP address of the

NMS300 server.

For more information, see Log in to the application on page 17.

A login window opens.

2. Enter your user name and password.