Installation Guide

NMS300 Network Management System Application
Monitor Your Network Quick Start Guide60
To hide the filter for devices or SSIDs, click the Hide Filter button.
The following figure shows a sample of a pop-up window that displays when you filter by
device IP address:
9. Select the device or SSID.
10. Click the Select button.
The pop-up window closes and the empty Active Client List table displays.
11. Click the Apply button.
The application populates the Active Client List table with the wireless clients of the
selected device or SSID.
12. To add columns to or remove them from the Active Client List table, right-click the table
heading anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: Client MAC Address, Client IP Address,
Location,
AP Name, Associated Controller, SSID, BSSID, Protocol, Authentication Mode,
Duration, Channel, RSSI, SNR, Transmit Power, Transmitted, Rate (Mbps), Received