Installation Guide

NMS300 Network Management System Application
Monitor Your Network Quick Start Guide59
3. Click the Sign In button.
The Network Summary page displays.
4. Select WIRELESS >
ACTIVE CLIENTS.
By default, the filter is active because the Active Client List table can display many
wireless clients.
5. To hide the filter for active clients, click the Hide Filter button and go to Step 12.
6. From the Device T
ype / SSID menu, select Wireless Controller, Standalone AP,
Controller Managed AP, or SSID.
The name of the field to the right of the Device T
ype / SSID menu adjusts according to
your selection from the menu.
7. Click the dots next to the field to the right of the Device Type / SSID menu.
A pop-up window similar to the following displays.
8. To filter the devices or SSIDs that are listed, click the Show Filter button.
You can filter the devices by criteria such as name, IP address, location, and model. You
can filter the SSIDs by criteria such as SSID name, device name, and device IP address.