Installation Guide

NMS300 Network Management System Application
Monitor Your Network Quick Start Guide58
4. Select WIRELESS > WMS.
5. To add columns to or remove them from the WMS List table, right-click the table heading
anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: Status, Device Name, IP Address,
Hostname, Managed By
, MAC Address, Device Model, Vendor, Location, Device Type,
Last Update Time, Hardware Version, Firmware Version, Configuration Version, Serial,
Number, Contact, and Discover Time.
6. T
o filter the devices that are listed, click the Show Filter button.
You can filter the devices by criteria such as type, name, IP address, vendor, model, and
status.
To hide the filter, click the Hide Filter button.
7. T
o view details about a device, click the device name (or IP address) for the device.
For more information, see
View device information and device details on page 52.
View wireless client information
The application lets you monitor the active wireless clients by wireless controller, standalone
AP, controller-managed AP, or SSID.
You can display various wireless details for each client.
To monitor wireless clients and view details for a single client:
1. Open a browser and connect to the application through the static IP address of the
NMS300 server
.
For more information, see
Log in to the application on page 17.
A login window opens.
2. Enter your user name and password.
The default administrator user name is admin and the default administrator password is
also admin.