Installation Guide

NMS300 Network Management System Application
Monitor Your Network Quick Start Guide57
The Network Summary page displays.
4. Select WIRELESS >
AP.
5. To add columns to or remove them from the Access Points table, right-click the table
heading anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: Status, Device Name, Associated Controller,
IP
Address, Hostname, Managed By, MAC Address, Location, Device Type, Device
Model, Vendor, Last Update Time, Hardware Version, Firmware Version, Configuration
Version, Serial Number, Contact, Discover Time, and Description.
6. T
o filter the devices that are listed, click the Show Filter button.
You can filter the devices by criteria such as device name, device IP address, controller
name, location, device model, and status.
To hide the filter, click the Hide Filter button.
7. T
o view details about a device, click the device name (or IP address) for the device.
For more information, see
View device information and device details on page 52.
View wireless management system information only
You can display only the wireless management systems that the application manages.
To view wireless management system information:
1. Open a browser and connect to the application through the static IP address of the
NMS300 server
.
For more information, see
Log in to the application on page 17.
A login window opens.
2. Enter your user name and password.
The default administrator user name is admin and the default administrator password is
also admin.
3. Click the Sign In button.
The Network Summary page displays.