Installation Guide

NMS300 Network Management System Application
Monitor Your Network Quick Start Guide56
4. Select WIRELESS > CONTROLLERS.
5. To add columns to or remove them from the Wireless Controllers table, right-click the table
heading anywhere, and specify the columns by selecting the corresponding check boxes.
You can choose from the following columns: Status, Device Name, IP Address,
Hostname, Managed By
, MAC Address, Location, Device Model, Vendor, Device Type,
Last Update Time, Hardware Version, Firmware Version, Configuration Version, Serial
Number, Contact, and Discover Time.
6. T
o filter the devices that are listed, click the Show Filter button.
You can filter the devices by criteria such as name, IP address, location, model, and
status.
To hide the filter, click the Hide Filter button.
7. T
o view details about a device, click the device name (or IP address) for the device.
For more information, see
View device information and device details on page 52.
View wireless access point information only
You can display only the standalone APs and controller-managed APs. The application
manages the standalone APs. The controller-managed APs are managed by their wireless
controllers and display for information only.
To view wireless access point information:
1. Open a browser and connect to the application through the static IP address of the
NMS300 server
.
For more information, see
Log in to the application on page 17.
A login window opens.
2. Enter your user name and password.
The default administrator user name is admin and the default administrator password is
also admin.
3. Click the Sign In button.