Installation Guide

NMS300 Network Management System Application
Discover Resources Quick Start Guide43
10. If the credential that you need is not listed in the table, do the following:
a. Click the Add button.
In addition to the default credentials, the pop-up window displays the device
credentials that you added. For more information, see
Add a device credential on
page 36.
b. Select one or more credentials and click the Add Selection button.
To add all credentials, click the Add All button.
The Select Credentials pop-up window closes and the credentials are added to the
Select Credentials table on the Network pop-up window (the figure that is shown in
Step 7).
c. On the Network pop-up window
, select the credential or credentials that you added.
11. Click the Save button.
The pop-up window closes and the new or modified discovery profile displays in the
Network Discovery table.
Execute a discovery job
You can execute a one-time discovery job immediately. For information about scheduling a
one-time or recurring discovery job, see the NMS300 Network Management System
Application User Manual.
To execute a discovery job:
1. Open a browser and connect to the application through the static IP address of the
NMS300 server
.
For more information, see
Log in to the application on page 17.
A login window opens.
2. Enter your user name and password.
The default administrator user name is admin and the default administrator password is
also admin.