Installation Guide
Table Of Contents
- NMS300 Network Management System Application
- Contents
- 1 Install the NMS300 Application
- 2 Get Started
- 3 Discover Resources
- 4 Monitor Your Network
- 5 Manage Configurations and Firmware
NMS300 Network Management System Application
Discover Resources Quick Start Guide37
4. Select RESOURCES > DEVICE CREDENTIALS.
5. Click the Add button.
6. In the Credential General Info section, enter the name for the credential.
7. From the Protocol menu, select one of the following protocols:
• SNMP V1
• SNMP V2C
• SNMP V3
• Telnet
• SSH
• HTTP
• HTTPS
Depending on your protocol selection, the pop-up window might adjust to display other
fields and menus.
8. In the
Authentication Info section, enter the information for the selected protocol.