Installation Guide
Table Of Contents
- NMS300 Network Management System Application
- Contents
- 1 Install the NMS300 Application
- 2 Get Started
- 3 Discover Resources
- 4 Monitor Your Network
- 5 Manage Configurations and Firmware
NMS300 Network Management System Application
Discover Resources Quick Start Guide34
5. Click the Quick Discovery button.
6. From the menu on the upper left of the pop-up window, select one of the following network
types and enter the applicable address information in the fields to the right of the menu:
• IP Range
• Subnet
• Single IP
• IP Address(es)
• Hostname
7. Specify the credentials that pertain to the devices on your network by select one of the
following types of credentials:
• Default SNMP
• Default HTTP
• Default Telnet
• Default HTTPS
• Default FVS318G HTTPS
Note: For the NETGEAR FVS318N, FVS336Gv2, FVS336Gv3, and
SRX5308 firewalls, use the default SNMP device credentials. For the
NETGEAR FVS318G firewall, use the default FVS381G HTTPS
device credential.