Installation Guide
Table Of Contents
- NMS300 Network Management System Application
- Contents
- 1 Install the NMS300 Application
- 2 Get Started
- 3 Discover Resources
- 4 Monitor Your Network
- 5 Manage Configurations and Firmware
NMS300 Network Management System Application
Quick Start Guide2
Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for helpful advice at community.netgear.com.
Regulatory and Legal
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à
https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in Canadian French at
https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
For NETGEAR's Privacy Policy, visit https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR's Terms and Conditions at
https://www.netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of
purchase within your return period.
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
Revision History
Publication Part
Number
Publish Date Comments
202-12596-01 January 2022 • Added support for the AV Line of M4250 series fully managed switches
(11
models, see NETGEAR fully managed switches on page 8).
• Added support for the following smart switches:
- GS108Tv3, GS110TPP, and GS110TPv3
- GS110TUP and GS710TUP
- MS510TXM and MS510TXUP
• Changed Add a device credential on page 36.
202-11288-06 March 2020 • Updated the Support and Community section and the Regulatory and
Legal section on this page.
• Added support for the following new smart switches:
- GS308T, GS310TP, GS324T, GS324TP, and GS348T
- GS728TPv2, GS728TPPv2, GS752TPv2, and GS752TPP
- MS510TX and MS510TXPP
- XS712Tv2
• Added support for the following new managed switches:
- M4300-16X, M4300-24XF, and M4300-48XF
- M4300-96X
- M4500-32C and M4500-48XF8C
• Added support for the following smart switches:
- GS418TPP, GS510TLP, and GS510TPP
- GS724TPv2
- XS708T and XS716T
• Added support for existing products that were not yet listed.
• Published the manual in the latest format.