Quick Reference Guide

Chapter 1: Overview | 17
NMS200 Quick Reference Manual
Figure 7. Initial Screen for Admin.
Click Begin Discovery. The Resource Discovery screen will display. You can enter the IP
addresses of devices to be discovered or a range of addresses to search. Consult the section
about Advanced Discovery in online help for additional information. Follow these steps to
discover your network resources:
1. The next Discovery Wizard screen that appears is where you determine what devices
you are going to discover. Here, you can specify the IP address ranges to include or
exclude, the SNMP authentication to use, and the ports to query, among other things.
At the top of this screen’s work area, select an address type from the drop-down list
(options include IP Range, IP address, Hostname, Subnet, CIDR, File Name, Multicast
SLP, SNMP Broadcast) and enter the appropriate information in the fields directly to the
right of that list. Then click Add to add the address(es) to the processing queue, or click