Owner's Manual

NMS200 Portlets

ProSafe Network Management Software NMS200

Note: The internal FTP/TFTP server is for testing only, not for production

use. For those concerned that the internal server provides some

insecure access to NMS200, it was designed to be ultra-secure. It

literally creates a separate authentication and virtual file system for

each file retrieved. It also responds only to Redcell’s internal

requests.

File Server Editor

This editor lets you configure new and existing file servers.

This is where you specify the Name, whether the server is Enabled, whether the connection

is secure (Secure FTP/SCP Server), supports TFTP, internal and external (optional) IP

addresses, and Net Masks, and the login and password for the file server. Once you have

configured a server, you can test the file server credentials by clicking on the Test button at

the bottom of the screen. Click Save to preserve your changes.

Tip: FT

P servers typically must be on the same side of the firewall as the

devices with which they communicate. If you have several such servers,

the specified Net Mask also determines which server communicates with

devices in which portion of the network.