Owner's Manual

NMS200 Portlets
75
ProSafe Network Management Software NMS200
the file server mode by checking/unchecking the Show All Servers check box. When this is
un-checked, only the relevant file server(s) appear onscreen.
Right clicking a file server, or the empty list space lets you do the following:
• Delete — Removes the selected file server from the list. This appears for External File
Servers only.
• Disable — Disables the selected file server. When file servers are disabled, they are not
u
sed in a Backup, Restore or Deploy operation. This too appears only for External File
Servers.
• Enable — Activates the selected file server. Again, exposed for External file Servers only.
• New — Displays the File Server Editor screen.
• Ope
n — Displays the selected File Server in the File Server Editor screen.
• T
est — Tests the selected file server by sending and retrieving a file.
Note: You can select whether NMS200 is in Internal or External File
Server Mode with the radio buttons at the top of this portlet.
Checking Show All Servers displays the internal file server.
CAUTION:
Port conflicts prevent having an external file server and internal file server
operate on the same machine.
Columns in this manager identify the server, and describe whether it is enabled, and has
TFTP enabled.