Owner's Manual

NMS200 Portlets

ProSafe Network Management Software NMS200

Entity Type: Interface, Logical interface

Attribute Description Redcell Email Action variable

Custom 1 Note that although you can re-name

any Custom attribute, you must use

the variable’s original name. For

example here, that is

{RedCell.Config.EquipmentManage

r_Custom1}

{RedCell.Config.Interface_Custom1}

Custom 2 {RedCell.Config.Interface_Custom2}

Custom 3 {RedCell.Config.Interface_Custom3}

Custom 4 {RedCell.Config.Interface_Custom4}

Encapsulation Encapsulation {RedCell.Config.Interface_Encapsulation}

IfIndex SNMP Interface Index {RedCell.Config.Interface_IfIndex}

Interface Description Description of the Interface {RedCell.Config.Interface_DeviceDescription}

Interface Number Interface Number {RedCell.Config.Interface_InterfaceNumber}

Interface Type Common Interface Type {RedCell.Config.Interface_CommonType}

MTU Maximum Transmission Unit {RedCell.Config.Interface_Mtu}

Name Interface name {RedCell.Config.Interface_Name}

Notes Interface Notes {RedCell.Config.Interface_Notes}

Port Number Port Number {RedCell.Config.Interface_PortNumber}

Slot Number Slot Number {RedCell.Config.Interface_SlotNumber}

Subnet Mask Subnet Mask of the Interface {RedCell.Config.Interface_SubMask}

Best practice is to clarify such attributes by combining them with others that spell out their

source.

File Servers

You must configure FTP and/or TFTP file servers to push and pull configuration files to and

from devices, or to deploy firmware updates. With this portlet you can switch between internal

and external file server mode, and Show or Hide not applicable File Servers depending on