Owner's Manual

NMS200 Portlets

ProSafe Network Management Software NMS200

Entity Type: Port

Attribute Description Email Action Variable

Custom 1 Note that although you can re-name

y Custom attribute, you must use

the variable’s original name. For

example here, that is

{RedCell.Config.EquipmentManage

r_Custom1}

{RedCell.Config.Port_Custom1}

Custom 2 {RedCell.Config.Port_Custom2}

Custom 3 {RedCell.Config.Port_Custom3}

Custom 4 {RedCell.Config.Port_Custom4}

Encapsulation Encapsulation {RedCell.Config.Port_Encapsulation}

Hardware Version Version of the port’s hardware {RedCell.Config.Port_HardwareVersion}

If Index SNMP If Index {RedCell.Config.Port_IfIndex}

MAC Address “Typically a MAC Address, with the

octe

s separated by a space, colon

or dash depending upon the device.

Note that the separator is relative

when used as part of a query.”

{RedCell.Config.Port_UniqueAddress}

Model Model number of the port {RedCell.Config.Port_Model}

MTU Maximum Transmission Unit {RedCell.Config.Port_Mtu}

Name Port name {RedCell.Config.Port_Name}

Notes Port Notes {RedCell.Config.Port_Notes}

Port Description Description of the port {RedCell.Config.Port_DeviceDescription}

Port Number Port Number {RedCell.Config.Port_PortNumber}

Slot Number Slot Number {RedCell.Config.Port_SlotNumber}

Speed Speed {RedCell.Config.Port_Speed}

Subnet Mask SubMask {RedCell.Config.Port_SubMask}