Owner's Manual

NMS200 Portlets

ProSafe Network Management Software NMS200

Basic Variables

Attribute Description Email Action Variable

Name The event / alarm name {Name}

Message Description from the event {Message}

Entity Name The entity (interface, card...) name {EntityName}

Equipment Manager Name The name of the equipment, parent or chassis. {EquipMgrName}

Device IP address the IP of the device in alarm {DeviceIP}

Entity Type Type of entity (Router, and so on) {EntityType}

Instance ID An identifier for the event {InstanceID}

Protocol Type Of originating alarm (

SNMP, syslog, etc.) {ProtocolType}

Protocol Sub Type Inform, Trap, [blank] (for internal events) {ProtocolSubType}

Receive Time {RecvTime}

Region The mediation server partition name. {Region}

Severity 0 - cleared, through 6 - critical, from Alarm Definition {Severity}

Source IP address The IP of the component sending the alarm {SourceIP}

The following section describe variables whose use may have a performance impact.