Owner's Manual

NMS200 Portlets

ProSafe Network Management Software NMS200

After you select the event and filtering, enter the Interval (seconds), the Action (Reject or

Suppress the event) and check Publish Event if you want it to register for NMS200. If you

Reject an event, it does not appear in Event history; if you Publish it, however, listeners

for that event will “hear” it.

• Su

ppress Alarm — This screen presents the Specify Event Filtering portion of the screen

without any Settings in the lower screen. Specify events/alarms to suppress with this

selection and filtering.

• Sysl

og —This screen presents the Specify Event Filtering portion of the screen without

any Settings in the lower screen. Specify events to select. Then click Next to go to the

Escalation tab.

Post-processing (automation) rules let you modify the Specify Event Filtering po

rtion of the

screen without any Settings in the lower screen. Specify events to select. Then click Next to

go to the Actions tab. See Actions on page 65 for more about that feature.

Syslog Escalation Criteria

This tab of Syslog Event Rules lets you manage events based on matching text, and

configure messages in response to such matches.

Criteria: Syslog Match Text

In this tab, enter the Syslog Match Text. Click the plus to add matching text to the list below

the Message Match Text field. Check the Match Any to match any or all of the entered match

text, rather than one or more specific strings.