Owner's Manual

NMS200 Portlets
63
ProSafe Network Management Software NMS200
• Device Access — The Device Access example creates a specific device access event for
user login, logout, login failure or configuration change. Select the Access Type (Config
Change, Login Failure, User Login, User Logout) from the pick list for that field.
Enter the User Name Variable and/or User Name RegEx match string in those fields. This
confines rule response to the selected users.
Check Su
ppress Correlated
events if you do not want to see events correlated with this
one.
• Frequenc
y
— This rule type changes event behavior based on the frequency of the
selected event’s occurrence frequency.
Enter the Duration (seconds) and Threshold Count for the event, then select an Action
(Reject or Suppress the event) and check Publish Event if you want it to register for
NMS200. If you Reject an event, it does not appear in Event history; if you Publish it,
however, listeners for that event will “hear” it.
• Reject Even
t — This screen presents the Specify Event Filtering portion of the screen
without any Settings in the lower screen. Specify events to reject with this selection and
filtering.
• Set Severity — This rule overrides the default alarm severity of an event selected and
f
ilte
red in the upper screen.
• State Flutter — This type of rule changes event behavior on transient state change
events like a series of LinkUp and LinkDown events for the same interface.