Owner's Manual

NMS200 Portlets
62
ProSafe Network Management Software NMS200
displayed events. After you finish event selection, click Done at the bottom of this selection
screen.
Click Add Filter to further filter the selected events. See Filters on page 39 for more about this
feature. After you Add Filter the button changes to Clear Filter so you can remove any filter
from the event rule.
Tip: NMS200 supports multiple IP addresses per resource. During event
processing, filters that include IP address criteria may behave incorrectly
when NMS200 evaluates the filter. Best practice is using resource
name(s) instead of IP addresses.
The following are processing rule types, and
a description of their properties.
• Pre-Process
ing — These rules either override the event definition, change the behavior
of an event or generate another event. The following are the different subtypes. These
are also called Correlation rules. See the descriptions below for additional information
about the available types.
• Pos
t-Processing — Also called Automation rules, these execute specified actions for the
rule after the event processing occurs.
The following are Pre-Processing/ Correlation rule subtypes: