Owner's Manual

NMS200 Portlets
58
ProSafe Network Management Software NMS200
Event History Snap Panels
Click a listed alarm to display its details in the Snap Panels. The Reference T
ree displays the
event’s relationship to any alarms, and to the source device. Click the plus (+) next to an item
in the tree to unpack it.
The Bindings Snap Panel displays the event’s varbind information, including the trap OID, the
device’s IP address, and other event-specific information.
You can right-click the listed events and Share with User (see Sharing on page 43), or Add /
Remove Columns.
Event Processing Rules
This portlet manages NMS200’s response to events. By default it appears with seeded rules,
but you can create your own (New), copy or modify (Copy or Open) or delete (Delete)
existing rules by right-clicking in the portlet. You can also Import and Export rules to files.
The Rule Type column indicates whether rules are Pre-Processing (Correlation) or
Post-Processing (Automation).
Icons in the Enabled and System columns indicate whether the rule is enabled—green is
enabled, red is not—and whether it is a System rule, or a non-system (user-created) rule.
Modifying or creating rules opens Rule Editor . See Rule Editor Example for steps to create
these rules.
When you Copy an event processing rule, NMS200 generates a new name, but you must
change that name before you save the event processing rule.