Owner's Manual

Getting Started

ProSafe Network Management Software NMS200

have a mail account. This screen configures the e-mail server so NMS200 can send such

automated e-mails.

This screen contains the following fields:

• SMTP Server Host — The IP address or hostname of your SMTP server.

• SMTP Server Port — The port for your SMTP server (110 is typical).

• Authentic

ation Enabled — Check this to enable authentication for this server. Checking

enables the next two fields.

• User Name — The login ID for the SMTP server, if authentication is enabled.

• Password — The password for the SMTP server, if authentication is enabled.

• Use SSL — Enable Secure Sockets Layer protocol to in

teract with your SMTP server.

• Return Address — The return address for mail sent from NMS200.

• Default Subj

ect — Text that appears by default in the subject line of mail sent by

NMS200.

• Connectio

n / Send Timeout — The time-outs for mail sent by NMS200.

• Max

Per Minute — The maximum number of e-mails NMS200 can send per minute.

• SMTP Server Host — The IP address or hostname of your SMTP server.

Two settings for e-mail servers appear in Control Panel, one in the Control Panel > Portal >

Settings Mail Host Names edit screen, and another in Control Panel > Server Administration

> Mail. The Portal-based e-mail settings help Administrators limit signups to e-mails only

existing in their organization. The screen in that panel provides a list of allowed domain

names, if that feature is enabled.

Control Panel > Server Administration > Mail is where to configure the Main server and

authentication for routing mail