Owner's Manual

File Server / File Management
177
ProSafe Network Management Software NMS200
4. Name the file, and, if necessary, configure a filter In the General Parameters tab of the
editor.
5. In t
he Configuration tab, locate the parameters you want to preserve in discovered devices
when you restore this file. This can include items like the device’s DNS Hostname, IP
Address,
and so on. Delete the file’s specifics and double-click to insert the Target Params
in place of these variables.
6. Save the conf
iguration.
7. Right
-click to deploy this configuration.
8. Y
ou can check Generate and save for configuration only if you simply want to configure
deployment for later, and save for now. You can also optionally name a label for the
deployed files.
9. Select
the devices, or groups of devices to which you want to deploy.
10. Click Save, E
xecute or Add Schedule depending on your desired outcome.
11. If you click Execute, you will have to
confirm this action.
When NMS200 performs the restoration (deploy), it reads the T
arget Params from those
discovered for each device, inserts those in the config file, then restores it, device by
device, skipping any that do not pass the filter set up in step 4.