Owner's Manual

File Server / File Management
167
ProSafe Network Management Software NMS200
File Server Editor
This editor lets you configure new and existing file servers.
This is where you specify the Name, whether the server is Enabled, whether the connection
is secure (Secure FTP/SCP Server), supports TFTP, internal and external (optional) IP
addresses, and Net Masks, and the login and password for the file server. Once you have
configured a server, you can test the file server credentials by clicking on the Test button at
the bottom of the screen. Click Save to preserve your changes.
Tip: FTP servers typically mu
st be on the same side of the firewall as the
devices with which they communicate. If you have several such servers,
the specified Net Mask also determines which server communicates with
devices in which portion of the network.
Notice that you can now configure an IP address used by NMS200, and another External IP
Address used by the devices. If you configure multiple file servers, NMS200 selects the
server with the Net Mask whose subnet is closest to the device(s) with which it
communicates.