Owner's Manual

Resource Management
142
ProSafe Network Management Software NMS200
• Device Options — This portion of the Backup Options screen displays detailed
configuration options available for the selected target. For example, you could select
between backing up the running-config and the startup-config.
5. Click one
of the buttons at the bottom of the screen to initiate the next backup action.
Add Schedule opens the
scheduling screen to let you automate the backup you have
configured on a specified date, time, or repetition. See Scheduling Actions on pag
e 154.
Execute performs the backup immediately. The Result
s tab in this screen opens,
displaying the message traffic between NMS200 and the device(s). See Audit Trail Portlet
on page 46.
Save preserves this co
nfiguration without scheduling or executing it.
Close closes this screen withou
t saving the configured restoration.
How To Restore
 The following are the steps to restore a config file to a device:
1. Make sure you
have configured an FTP or TFTP server to handle the backup. See
Netrestore File Servers on page 30
.
2. Right-click a device in t
he Managed Resources portlet.
3. Select File Manage
ment > Restore.
4. Configure the subsequent Restore Device
screen.
This screen lets you configure the following:
• Select Targets for Restore — Th
is portion of the screen lets you Add Equipment, Add
Groups, or Remove All target devices. Listed targets and their Restore Config / Label
Selection. Click the icon in the Action column to remove the listed target.