Owner's Manual

Resource Management
134
ProSafe Network Management Software NMS200
Click Save to preserve any changes made in these screens to NMS200’s database, or Close
to abandon any changes made in editor screens.
General
This screen displays the Name
, Description, IP Address, Location, and Contact for the
selected device. You can also check Manage by Hostname on this screen.
Authentication
This screen lets you select authentications (that originate in the portlet described in
Authen
tication on page 121) for the selected device. Click Add Auth to select from available
authentications. Click the minus icon to the right of a selected authentication to remove it.
Management Interface
This lets you configure the management interface for the se
lected device. Click Add Interface
to configure a new one. First select the type (Telnet, SSH, and so on), then configure the IP
Address, Port, Retries, Timeout and whether the interface is Enabled in a subsequent
screen.
• Actions — These can include things like service discovery, or custom Adaptive CLI
Activities
you have configured. For some devices, the last sub-menu item (Adaptive CLI)
opens a popup selector with a Find field at the bottom where you can review all available
actions for the selected device. If you select one, you can click Execute to run it manually.
Note: Since menu items appear in alphabetical order, this may be in a
different location, depending on the device vendor name.
• Delete — Remove the selected device from inventory.