Owner's Manual

Resource Management
128
ProSafe Network Management Software NMS200
• Edit, Delete, Move — These icons appear to the right of each action. If you Edit a
profile with parameters, you can change them. The screen looks like the one that
appears when you Add actions. Deleting actions removes them from the list, and the
Move arrows help arrange the order in which actions appear listed, and are executed.
The list of actions the profile executes goes from top-to-bottom.
Inspect
Using the Inspection Panel is an optional step. If you want to
execute the profile after entering
the required information on the General and Network panels, you can skip this step, and just
click Execute at the bottom of the panel.
6. In
spect — This
screen lets you preview the discovery profile’s actions and access to devices.
If you clicked Next rather than Inspect at the bottom of the previous screen, click Start
Inspection in the top right corner of this screen to begin the inspection process that validates
the device’s credentials.
Notice that the Inspection Status fields at the bottom of the screen indicate the success or
failure of Ping, Hostname resolution, and Authentications, and the Status column displays
whether a valid authentication exists, whether it has been tested, and whether the test is
successful.
When authentications are unsuccessful, you can click Previous to go to th
e Network
screen and remove or edit them. You can also click the wrench / screwdriver “fix it” icon in