Integration Guide

Rev 3 Sep.13 Proprietary and Confidential 7
1
1: Introduction
The NETGEAR NM7371 PCI Express Mini Card is a compact, lightweight,
wireless LTE- and CDMA-based modem used to enable rapid development
and deployment of NETGEAR WWAN-enabled devices.
The NM7371 provides LTE, CDMA, and GNSS connectivity for NETGEAR
Wireless WWAN-enabled Gateway & Router products.
This module is intended for internal NETGEAR use only and will not be
offered for sale through OEM channels or sold through direct retail (end-
user install) channels.
Required connectors
Table 1-1 describes the connectors used to integrate the NM7371 into
your host device.
Table 1-1: Required host-module connectors
a
Connector type Description
RF cables • Mate with Hirose U.FL connectors
(model U.FL #CL331-0471-0-10)
• Two connector jacks
EDGE (52-pin) • Industry-standard mating connector
• Some manufacturers include Tyco, Foxconn, Molex
• Example: UDK board uses Molex 67910-0001
SIM • Industry-standard connector. Type depends on how host
device exposes the SIM socket
• Example: UDK board uses ITT CCM03-3518
a. Manufacturers / part numbers are for reference only and are subject to change. Choose connec-
tors that are appropriate for your own design.