Owner's Manual

Table Of Contents
Enable Circle With Disney from your Orbi router web
interface
You can enable Circle using the Orbi router web interface, but you must use the Circle
app to finish setting up your Circle account.
Before enabling Circle, make sure that your router is running the latest firmware and
that your router is in router mode. Your router must be in router mode to work with
Circle. You can't enable Circle if your router is in access point (AP) mode or bridge
mode.
To enable Circle with Disney:
1.
Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Makes sure that your router is in router mode.
For more information, see Set Up Router Mode on page 81.
5.
Update your router's firmware.
For more information, see Update the Router and Satellite Firmware on page 87.
6. Select BASIC > Parental Controls.
The Parental Controls page displays.
7. Move the slider to the right to enable Circle with Disney.
Note: You can only enable one parental controls service.
8. Click the Apply button.
The links to download the Circle app displays.
9. Download the Circle app on your mobile device.
10.
Launch the Circle app and follow to prompts to set up Circle.
Circle with Disney is enabled on your NETGEAR router.
User Manual42Control Access to the Internet
Orbi Whole Home AC1200 Mesh WiFi System