Manual

Hardware Setup
12
N600 Wireless Dual Band Router WNDR3400v2
LAN ports
1–4
• Solid green. The LAN port has detected a 1,000 Mbps link with an attached device.
• Blinking green. Data is being sent at 1,000 Mbps.
• So
lid amber. The LAN port has detected a 10 Mbps link with an attached device.
• Bl
inking amber. Data is being sent at 100 Mbps or 10 Mbps.
• Off. No
link is detected on this port.
5 GHz
5
GHz
• Solid blue. The wireless radio is operating.
• Bli
nking blue. Data is being sent or received over the wireless network.
• Off. The wireless radio is off.
2.4 GHz
2.4
GHz
• Solid blue. The wireless radio is operating.
• Bli
nking blue. Data is being sent or received over the wireless network.
• Off. The wireless radio is off.
Internet
• Solid amber. The IP address has not been acquired.
• Solid green. An IP address was received; ready to transmit data.
• Blin
king green. Data is being sent to or received from the Internet.
• Off. No
Ethernet cable is connected between the router and the modem.
Power/Test • Solid amber. The unit is starting up after being powered on.
• So
lid green. The power is on and the router is ready.
• Bl
inking amber. A firmware update is in progress.
• Blinking green. The firmware is corrupt.
• Off. Po
wer is not supplied to the router.
WPS
• Solid green. Indicates that wireless security is enabled.
• Blin
king green. The router is using WPS to add a wireless device to the network.
• Off. No
WPS connection exists.
Table 1. Front panel LED descriptions (continued)
LED Description