User's Manual

Specify Internet Port Settings
96
N300 WiFi Router
4. Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering screen displays.
5. Select the Port Triggering
radio button.
6. Click the Add Service button.
7. In the Service Name field, type a descriptive service name.
8. From the Service User list, select a user option:
• Any (the default) allows any computer on the Internet to use this service.
• Single address restricts the service to a particular computer.
You must enter the IP
address of the computer to which you want to grant access.
9. From the Service Type
list, select a service.
If you are not sure, select TCP/UDP.
10. In the Triggering Port field, enter the number of the outbound traf
fic port that will open the
inbound ports.
11. In the Connection Type, Starting Port
, and Ending Port fields, enter the inbound
connection port information.
12. Click the Apply button.
The service is added. You must enable port triggering before the router uses port
triggering.