User's Manual

Specify Initial Settings
27
N300 WiFi Router
Your settings are saved.
Set Up a DHCP IPv6 Internet Connection
 To set up an IPv6 Internet connection with a DHCP server:
1. Launch a web browser from a computer or wireless device that is connected to the
network.
2. In the address field of the web browser
, enter www
.routerlogin.net or
www.routerlogin.com.
A login screen displays.
3. Enter the router user name and password.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED >
Advanced Setup > IPv6.
The IPv6 screen displays.
5. In the Internet Connection Type list, select
DHCP.
The screen adjusts:
The router automatically detects the information in the following fields:
• Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired
for the router’
s WAN (or Internet) interface. The number after the slash (/) is the length
of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired
for the router’
s LAN interface. The number after the slash (/) is the length of the prefix,
which is also indicated by the underline (_) under the IPv6 address. If no address is
acquired, the field displays Not Available.