User manual

Maintain and Monitor the Extender
60
N300 WiFi Range Extender WN2000RPT
5. Click the Show Statistics button.
The following table describes the traffic statistics fields that display for each of the four
LAN ports and for the WLAN port.
6. To change the poll interval:
a. Click the
Stop button.
b. In the Poll Interval field, enter a new value in seconds.
c. Click the Set Interval button.
Extender Wireless Settings
Name (SSID) The name (SSID) of the WiFi network of the extender.
Region The location in which the extender is operating.
Channel The active channel of the WiFi network.
Wireless AP Shows whether the WiFi access point of the extender is on.
Broadcast Name Shows whether broadcasting of the network name (SSID) of the extender is on.
Wi-Fi Protected Setup Shows whether Wi-Fi Protected Setup (WPS) is configured.
Field Description
Status The link status of the port.
TxPkts The number of packets transmitted on the port since the extender was restarted.
RxPkts The number of packets received on the port since the extender was restarted.
Collisions The number of collisions on the port since the extender was restarted.
Tx B/s The packet transmission rate in bytes per second on the port.
Rx B/s The packet reception rate in bytes per second on the port.
Up Time The time elapsed since the extender was restarted.
Field Description