User manual

Maintain and Monitor the Extender
59
N300 WiFi Range Extender WN2000RPT
The following table describes the fields on the Status screen.
Field Description
Hardware Version The hardware version of the extender.
Firmware Version The current firmware version of the extender. If you upgrade the firmware, this field
changes.
GUI Language Version The language version that is set on the extender. If you upgrade the firmware, this
field might change.
Connection Status to Existing Network
Name (SSID) The name (SSID) of the WiFi network to which the extender is connected.
Connection Status Shows whether the extender is connected to a WiFi network.
Link Rate The combined transmission (Tx) and receive (Rx) link rate in Mbps of the current
WiFi connection.
Extender IP Info
MAC Address The physical address of the extender.
IP Address The IP address of the extender. The default is 192.168.1.250.
DHCP Client Shows whether the DHCP client of the extender is on.
IP Subnet Mask The IP subnet mask that is associated with the IP address of the extender. The
default is 255.255.255.0.
Gateway IP Address The IP address of the WiFi network gateway.
Domain Name Server The IP address of the Domain Name Server (DNS) of the WiFi network.