User manual

Manage the Extender Network and Security Settings
38
N300 WiFi Range Extender WN2000RPT
Configure WPA, WPA2, or WPA + WPA2
Both WPA and WPA2 provide strong data security. WPA2 with AES is a hardware
implementation. If you want to use WPA2 security, make sure that all devices in your WiFi
network support WPA2 security. If you are not sure, use WPA + WPA2 security.
 To configure WPA, WPA2, or WPA + WPA2 in the extender:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer
.
2. In the address field of your browser, enter http://www
.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser
.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Setup > Wireless Settings.
5. In the Security Options section, select the WPA-PSK [TKIP]
, WPA2-PSK [AES], or
WPA-PSK + WPA2-PSK radio button.
6. In the PassPhrase field, enter the passphrase.
7. Click the Apply
button.
Your settings are saved.
8. If you are disconnected, reconnect your WiFi device to the extender’
s
network with its new
settings.
The Setup Wizard can guide you through this process. For more information, see Run the
Setup Wizard Again After Initial Setup on page 47.