User manual

Manage the Extender Network and Security Settings
34
N300 WiFi Range Extender WN2000RPT
You can view this passphrase on the Wireless Settings screen (for more information, see
Manage the Extender WiFi Settings on page 36).
Note: For information about using WPS to connect the extender to a WiFi
network during setup, see Connect the Extender with WPS to a WiFi
Network on page 12.
Use WPS with the Push Button Method
To use the Push button method to connect a WiFi device to the extender’s WiFi network, the
WiFi device that you are trying to connect must have a physical Push button or a software
Push button.
 To let a WiFi device join the extender’s WiFi network using WPS with the Push button
method:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://www
.mywifiext.net.
You are prompted to enter a user name and password. If you do not see the login prompt,
make sure to include http:// when you type http://www.mywifiext.net in your browser
.
3. Type admin for the user name and type your password.
If you have not yet personalized your password, type password for the password.
4. Select Add WPS Client.
The screen displays a description of the WPS method.
5. Click the Next button.
By default, the Push Button (recommended) radio button is selected.
6. Either click the button onscreen or press the WPS button on the front panel of the
extender.
For two minutes, the extender attempts to find the WiFi device (that is, the client) that you
want to join the extender’
s WiFi network.