User manual

Get Started
22
N300 WiFi Range Extender WN2000RPT
11. Use the default extension name, or, in the 2.4GHz Network Name (SSID) field, enter a new
network name for your extender WiFi network, and click the Continue button.
The extender applies the settings.
12. W
ait about two minutes while the extender creates the WiFi network.
13. Use a WiFi network manager on the computer or mobile device to connect to the extender’s
newly created WiFi network.
Note: Unless you entered a new network name in
Step 11, the extender
changes its default NETGEAR_EXT network name to the name of the
WiFi network to which you connected the extender and adds _EXT at
the end of the name.
Note: If your computer or mobile device cannot join the new WiFi network of
the extender, see You Cannot Join a WiFi Network and Receive an
Error Message on page 65.
14. Select the My wireless devices are connected to the Extender network check box, and
click the Continue button.