User Guide
Advanced
95
Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
Enable Remote Management
Using the Remote Management screen, you can allow a user or users on the Internet to
configure, upgrade, and check the status of your router.
Tip: Be sure to change the r
outer default password to a very secure
password. The ideal password should contain no dictionary words from
any language, and should be a mixture of letters (both uppercase and
lowercase), numbers, and symbols. Your password can be up to 30
characters.
To configure remote management:
1. Log in to the router. Type http://www.routerlogin.net in the address field of your
I
nternet browser. Enter admin for the user name and your password (or the default,
password
).
2. Under Advanced, select Remote Ma
nagement.
3. Select the Turn Remote Management On
check box.
4. Specify which external addresses will be allowed
to access th
e router’s remote management.
For security, restrict access to as few external
IP
addresses as practical:
• T
o allow access from any IP address on the
In
ternet, select Everyone.
• To allow access from a range of IP
a
ddresses on the Internet, select IP
Address Range. Enter a beginning and ending IP address to define the allowed
range.
• To allow access from a single IP address on the Internet, select Only This Compute
r.
Enter the IP address that will be allowed access.
5. S
pecify the number of the port that will
be used for accessing the router menu.
Access normally uses the standard HTTP service port 80. For
greater security, you can
enter a different port number. Choose a number between 1024 and 65535, but do not use
the number of any common service port. The default is 8080, which is a common
alternate for HTTP.
6. Click Appl
y to have your changes take effect.
When accessing your router from the Internet, type your router WAN IP address in your
Internet
browser address or location field, followed by a colon (:) and the custom port
number. For example, if your external address is 134.177.0.123 and you use port number
8080, enter http://134.177.0.123:8080. Be sure to include http:// in the address.