Operation Manual

Managing Your Network
65
Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
- MAC Address. The physical address of the Router, as seen from the Ethernet
WAN.
- IP Address. Current Internet IP address. If assigned dynamically, and no Internet
connection exists, this will be blank or 0.0.0.0
- Network Type. Type of network client.
- IP Subnet Mask. The subnet mask associated with the Internet IP address
- Gateway IP Address. Gateway IP address of the Router.
- Domain Name Server. Displays the address of the current DNS.
• Wireless Broadband Modem. These are the current settings of mobile broadband
device.
- Modem Identity. Identity of this USB modem device.
- Modem SW version. Software/Firmware version of this USB modem device.
- Modem driver version. Kernel driver version.
- IMSI. International Mobile Subscriber Identity.
- IMEI. International Mobile station Equipment Identity.
- Operator. The internet service provider name which has connected.
- Network mode. Current access technology
- Network band. Current access technology
• Wireless Broadband Port. These are the current settings of mobile broadband
WAN.
- Connection Status. The current state of the Mobile broadband connection to
your cellular ISP.
- IP Address. Mobile broadband IP address of the Router.
- Protocol. Protocol of the mobile broadband port.
- IP Subnet Mask. Subnet mask associated with the mobile broadband IP address.
- Domain Name Server. Displays the address of the current DNS.
• LAN Port. These are the current settings, as set in the LAN IP Setup page.
- MAC Address. The physical address of the Router, as seen from the local LAN.
- IP Address. LAN IP address of the Router.
- DHCP. Indicates if the Router is acting as a DHCP Server for devices on your
LAN.
- IP Subnet Mask. Subnet mask associated with the LAN IP address.
• Wireless Port. These are the current settings, as set in the Wireless Settings page.
- Name (SSID). SSID of the Router.
- Region. The location (country).
- Channel. The current channel in use.
- Wireless AP. Indicates if the Access Point feature of the Router is enabled or not.
If not enabled, the Wireless LED on the front panel will be off.
- Broadcast Name. Indicates if the Router is broadcasting its SSID.