Installation Guide

USING YOUR TURBO HUB

Connecting your computer through an Ethernet cable

 • AttachtheEthernetcabletooneoftheEthernetconnectors

(1–4)onthebackoftheTurboHub.

 • ConnecttheotherendoftheEthernetconnectortoaPC/laptop.

 • LaunchyourInternetbrowserandyou’reonline.

Youcanconnectuptofour(4)computersusingtheEthernetports.Oneshielded

Ethernet cable is included.

Note: If connecting additional PCs, use only shielded Ethernet cables in order to

fulllelectricalemissionsrequirements(CE,FCC).

Connecting your device through Wi-Fi

Wi-Fi security has been enabled on your Turbo Hub. To connect through Wi-Fi,

enterthefollowingonyourWi-Fi-enabledPC/laptopordevice:

 • TheWi-FiNetworkName(SSID).YoucanndyourWi-FiNetworkName

(SSID)printedonthesideofyourTurboHub.TheWi-FiNetworkName

(SSID)willbeBellXXXX,whereXXXXisrandomnumbersorletters.

 • TheWPAPassphrase.YoucanndyourWPAPassphraseprintedonthe

sideoftheTurboHub,underthetitle“WPA/WPA2–PSKPassphrase.”

 • LaunchyourInternetbrowserandyou’reonline.

Note:Youcanconnectupto15devicesusingEthernetand/orWi-Fi.

Wi-Fi Network Name (SSID) WPA/WPA2 Passphrase