Installation Guide

Start-up

 • AllowapproximatelyoneminutefortheTurboHubtoboot/start-up.

When the start-up procedure is ﬁnished, the following conditions

should exist:

1. The Power indicator

will show solid green.

2. The Internet Port indicator

will show solid or blinking green.

3. The Wi-Fi indicator

will show solid or blinking blue.

4. The LAN Ports indicator

will show solid or blinking green if

any local Ethernet ports are connected.

5. One of the Signal Quality indicators will light up to show the

level of signal strength on the Bell network.

a. Excellent coverage indicator

will show solid blue

b. Good coverage indicator

will show solid blue

c. Poor coverage indicator

will show solid blue

None of the signal indicators will be lit if there is no coverage.

If any of these conditions do not occur, refer to the troubleshooting section on

page 9 or refer to your User Guide CD.