Datasheet

PAGE 11 of 13
8-Port Multi-Gigabit/10G Ethernet
Smart Switch with 2 SFP+ Ports
Data Sheet | MS510TXM, MS510TXUP
Quality of Service MS510TXM MS510TXUP
TCP/UDP-based Yes
Weighted Round Robin (WRR) Yes
Strict priority queue technology Yes
Auto-VoIP VLAN / Auto-Voice VLAN
Yes, manual or automatic assigment of VoIP phone trafc based on OUI bytes
(default database and user-based OUIs) in the phone source MAC
address to Voice VLAN associated with high priority QoS parameters
Other Features
Advanced per-port PoE controls
(enable/disable/power limit)
Yes
Advanced per-port PoE scheduling Yes
Loop detection & prevention Yes
DNS Client Yes
Option to enable/disable BPDU ooding when
STP is disabled
Yes
Option to enable/disable the ooding of EAPOL
when 802.1x is disabled
Yes
Management, Monitoring & Troubleshooting
Cloud/Remote management Yes
Insight mobile app & Insight Cloud
Portal management
Yes
uPnP Discovery Yes, activated by default
Networking monitoring Yes
Data/performance logs Yes
Centralized network conguration/policies
(network-centric management)
Yes
Device auto-join and congure
(zero-touch provisioning)
Yes
Multi-site, multi-network single pane-of-glass view Yes
Multi-switch, multi-port concurrent conguration Yes
Network/global password
(for all Insight Managed devices on a network)
Yes (per network/subnet via NETGEAR Insight mobile app and
Insight Cloud Portal)
Password management Yes
IP Access List Yes
Congurable management VLAN Yes
Admin access control via RADIUS and TACACS+ Yes
IPv6 management Yes
SNTP client over UDP port 123 Yes
Firmware upgrade direct from Cloud (via mobile
device or Insight Cloud Portal)
Yes
SNMP v1/v2c Yes
SNMP v3 with multiple IP addresses Yes