User Manual
Table Of Contents
- Contents
- 1. Hardware
- 2. Install and Access the Switch in Your Network
- 3. Optimize the Switch Performance
- 4. Use VLANS for Traffic Segmentation
- 5. Manage the Switch in Your Network
- 6. Maintain and Monitor the Switch
- Update the firmware on the switch
- Manage the configuration file
- Return the switch to its factory default settings
- Control access to the device UI
- HTTP and HTTPS management access
- Change or lift access restrictions to the switch
- Manage the DoS prevention mode
- Manage the power saving mode
- Control the port LEDs
- Change the switch device name
- View system information
- Date and time settings
- View switch connections
- View the status of a port
- Power over Ethernet
- 7. Diagnostics and Troubleshooting
- 8. Factory Default Settings and Technical Specifications
- A. Additional Switch Discovery and Access Information
Related documentation
Related documentation is available at netgear.com/support/download/:
•
Installation guide
•
Data sheet
Switch package contents
The package contains the switch, AC power adapter (power cable localized to the
country of sale), wall-mount installation kit, rubber feet, and installation guide.
Supported switch models
This manual describes the 8-Port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch
Model MS108EUP.
LEDs
This section describes the LED designations. The port LEDs are located above the ports.
Ports 1 through 4 are 60W PoE++ ports, and ports 5-8 are 30W PoE+ ports.
User Manual8Hardware
8-port Ultra60 PoE++ Multi-Gigabit (2.5G) Ethernet Plus Switch